The Cisco PowerVu Model D9850 Program Receiver

Functions

• Four L-band inputs

• PowerVu-conditional access with Data Encryptions Standard (DES) or Digital Video Broadcasting (DVB) decryption

• Support for conditional access to the Basic Interoperable Scrambling System (BISS)

• 4:2:0 NTSC and PAL (B, G, I, D, M and N) video decoding

• Aspect ratio conversion (4:3, 16:9 and 14:9) with AFD (Active Format Descriptor) control

• MPEG and Dolby Digital (AC-3) audio decoding

• Four audio outputs, providing either two stereo pairs (four mono channels) of balanced audio, each with the ability to use part of its output for applications such as SAP, DTMF, etc.

• Line 21 subtitles and V-Chip support

• Supply data via RS-232

• IP data output up to 50 Mbps over Ethernet

• DVB VBI (WST, WSS and VPS)

• PowerVu VBI, including North American Broadcast Teletext Standard (NABTS) and World System Teletext (WST)

• DVB or Imitext subtitling

• DTMF cue tone and cue trigger outputs for inserting advertising

• Fingerprint trigger

• Field-updatable software and security

• Liquid crystal display (LCD) on the front for control and monitoring

• 64 user-editable preset configurations

• Control of the addressable uplink decoder output (VBI, audio routing, DPI and ASI output)

• Simple Network Management Protocol (SNMP) for setup, control and monitoring

• Web browser interface for easy setup, control and monitoring

• Digital program change for uplink control of program change in blackout areas

Service description

Standards MPEG-2 and DVB compatible

EN 300 421, EN 300 468

Demodulation Quaternary phase-shift clocking (QPSK)

Variable for forward error correction (FEC) (1/2, 2/3, 3/4, 5/6 or 7/8)

tuner

Input level -25 to -65 dBm per carrier

Frequency range 950 to 2150 MHz

Tuning step size 125 kHz

Symbol rate range 1.0 to 45 Msymbols per second

Carrier detection range ≥ ±3.0 MHz (5-45 Msym)

Satellites C-band and Ku-band

Input impedance 75Ω

Analog video output

Number of channels 1 (2 identical outputs)

Video decompression type MPEG-2 4:2:0

Output level 1.0Vpp ± 5%

Output impedance 75Ω

Video standard NTSC and PAL B, G, I, D, M and N

NTSC 0.0-4.2MHz ≤ +0.5dB/-0.75dB

PAL 0.0-5.0 MHz ≤ +0.5/-1.25 dB

Maximum video resolution 720x480/576

Maximum video bitrate 15 Mbps

Chroma-Luma delay ± 30 ns

Field time distortion ≤ 3%

Line time distortion ≤ 3%

Differential phase ≤ 3°

Signal-to-noise ratio ≥ 55 dB

Analog audio output

Number of channels : 2 stereo pairs/4 mono channels

Audio decompression MPEG or Dolby Digital

Output level Balanced, adjustable audio outputs are factory set to unity gain (0 dBm out of 600 Ω for 0 dBm input). The output is adjustable by ±6.0 dB on the front panel (Ref. 100 kΩ) and factory calibrated to +18 dBu (at full scale).

Frequency response ±0.5 dB, 20 to 20 kHz (ref. 100 KΩ)

Total harmonic distortion < 0.3% at 1 kHz (ref. 100 KΩ)

Dynamic range 85 dB (CCIR Average Response Meter (ARM) weighting)

Crosstalk 80 dB at 1 kHz (typical)

VBI • NTSC lines 10 to 22, fields 1 and 2

• Line 21 subtitle

• NABTS

• AMOL I and II (Nielsen)

• PAL lines 7 to 22, fields 1 and 2

• WST

• WSS

• Showmen

Data output from asynchronous RS-232 data at rates up to 38.4 kbit/s

interest rates 300, 1200, 2400, 4800, 9600, 19, 200 and 38,400 basis points

Ethernet output for IP data RJ-45, 10BASE-T Ethernet and 100Base-T Ethernet, up to 50 Mbps

Cue trigger outputs

Number of outputs 8

type Open Collector

Cue tone output

Balanced audio output -3.0 dBu ±3 dB, 600 Ω

Output impedance < 50Ω

Ethernet output for control and monitoring (the same port is used for data) RJ-45, 10BASE-T Ethernet and 100BASE-T Ethernet

MPEG-2 transport output EN 50083-9, DVB-ASI coaxial, 188 byte packets

Programmable relay output Alarm or configurable to one of the 8 open collector outputs

MPEG-2 transport input EN50083-9, DVB-ASI coaxial, 188/204 byte packets

Two SDI video outputs (with embedded audio, same video channel) BNC, SMPTE-259MC

Two digital audio outputs (one stereo channel each): BNC, AES-3id

Environmental/Physical

Operating temperature 0 to 50 °C (32 to 122 °F) (without SDI option)

Storage temperature -20 to 70 °C (-4 to 158 °F)

Physical dimensions 1.75 in x 19.0 in x 15 in (4.4 cm x 48.3 cm x 38.1 cm) 1U high, 19-inch EIA rack mountable

Weight approx. 10 lbs (4.5 kg)

Power

Voltage range 100 V to 240 V AC

Mains frequency 50/60 Hz

Power consumption 50W max.

LNB power supply RF1 +13 V or +18 V at a maximum of 400 mA